[Previous] -- [Matt's Lego Roller Coaster] -- [Next]
Here is a good overview of the hill. You can see each yellow 1x3 plate on the chain from here. The chain is made with 8 normal Technic chain lengths and then one Technic bulldozer chain length. The 1x3 plates are stuck to the bulldozer chain length. Another fix that I need to try is to replace the 1x3 plates with 1x4 tiles. The tiles should grip the train just fine, and they may have the advantage of being low enough that it will not matter where the train catches the chain - the chain will still not bind. If the roller coaster ever shows again that is what I will do.
[Previous] -- [Matt's Lego Roller Coaster] -- [Next]
| Matt's Lego Creations |